Tap and Thread FAQ

Tap and Thread FAQ

Jet Adapter : Outer threads are 1/8″NPT, inner thread is M8 x .75mm

Jet : Outer threads are M8 x .75, Inner threads are M6 x .50mm

System Fittings : 1/8″BSPP i.e. pump bushing I.D., FAV inlet and outlet, flowsensor inlet and outlet

Pump : 3/8″BSPP OR 3/8″NPT will also work

When tapping 1/8″NPT for the jet adapter, you will need to slowly work up towards the top of the tap.  1/8″NPT is a tapered thread, and Aquamist uses the top half of the tap for sizing.